The Reds cone valve replaces the shim-stack mid-valve in your fork with a machined cone and spring. Damping stays firm through the normal stroke and opens up on sharp, square-edged hits, so the fork holds up under braking and stays plush on rocks, roots and chop.
Fits WP Xplor 48 open-cartridge forks:
KTM EXC, EXC-F, XC-W, XCF-W 2017–2023
Husqvarna TE, FE 2017–2023
GasGas EC 2021–2023
Sherco SE, SEF Factory 2017–2018
Also fits the KTM 690 Enduro R, 790 and 890 Adventure (base and R), Husqvarna 701 Enduro and 701 Enduro LR (2020 and newer), Norden 901 and Norden 901 Expedition, and GasGas ES 700. Not the Rally editions, which come with WP's Pro fork.
Not sure which kit fits your bike? Send us your year and model before you order.
Single valve goes in one leg, the standard setup for this fork. Pair kit puts a valve in each leg.
Install: about 90 minutes for a qualified suspension tuner, usually done during a fork service. Buy the kit, or have Alpine XC install it and set float for how you ride at our Sandy, Utah shop. Not local? Mail in your forks.
Warranty: lifetime on machined parts, two years on springs. Machined in Pleasant Grove, Utah.
